Two Component flexible, cementitious coating for waterproofing/ damp-proofing of new and existing structure


ADBEEL WaterSEAL comprises a liquid polymer A component and a special cement based powder B component. The two components are mixed together with a slow speed drill and paddle to form a smooth slurry. The slurry is applied by trowel or brush in two coats, to horizontal and vertical surfaces and dries to form a hard but flexible waterproof cementitious coating


  • Basements
  • Swimming pools
  • Wetareas-Kitchens/Bathrooms
  • Balconies
  • Planter boxes
  • Lift pits
  • Concrete tanks
  • Floors


  • Easy to apply by brush or in thin trowel applications
  • Supplied in per measured packs – nouncontrolled water addition
  • Hand or spray applied
  • Easy and fast mixing
  • Very good adhesion with sound and prepared substrates
  • Protects concrete against water penetration, chloride and carbonation
  • Watervapors permeable
  • Non-corrosive to steel or iron
  • Approved for potable water contact
  • Flexible enough to bridge hairline crack
  • Easy application, to internal or external surface


Depending on type of application, 2 coats are always required. For water proofing upto 1 m head pressure -1.5 kg /m2 per coat. Above 1 mm head pressure: 2.0 kg/m2 per coat, 3 coats may be required in areas of extremely high infiltration. Normally 3.00 kg of ADBEEL WaterSEAL is sufficient to cover one square meter area. On well prepared smooth substrate the consumption would be less.