WATER PROOFING / BONDING AGENT ACRYLIC LATEX ADBEEL WATERFIX

DESCRIPTION

WaterFIX is Acrylic Latex based waterproofing additive cum bonding agent

WaterFIX is based on specially selected raw materials and is manufactured under controlled conditions to give a consistent product.

TYPICAL PROPERTIES

Appearance: White emulsion Specific Gravity: 1.04 at 20o C

ADVANTAGES

  • Water proofing of water tanks roof, balconies, terraces, wet areas, reservoirs
  • Swimming pools and fountains
  • Bonding old to new concrete
  • Additive for repair mortar
  • Enhances strength & durability of repair mortar
  • Stability for external and internal repairs
  • Good water proofing property

APPLICATION PROCEDURE:

  • Surface must be thoroughly cleaned to remove all dust and debris
  • Surface should be free from oil wax and other contamination
  • Ensure substrate is sound before application
  • Wet the surface before coating to achieve SSD condition
  • Mix cement and WaterFIX in the ratio of 2:1 parts by weight to get uniform and consistent slurry by using low speed stirrer
  • Apply material by brush
  • Min two coatto be applied in the interval of 5-6 hours
  • Mixfrequently to avoid setting during application
  • Cure for 3 days

Coverage:-Sqm/kg mix in 2 coat

MIX RATIO

Cement -50 KG

Sand fine -125 KG

WaterFIX -10 Liters

Water -To get desire consistency

PACKAGING: -1,5,50,210 KG